Casing And Interior; Drain Residual Water; Storage; Troubleshooting - Clatronic EWB 3526 Manual De Instrucciones

Casing and Interior

• Clean casing and interior with a damp cloth.
• Use a diluted solution of vinegar and water.

Drain Residual Water

Drain the remaining water at the end of the day.
• Rest the appliance on a table edge. Hold a bowl under
residual water drain valve.
• Turn the residual water drain valve anti-clock-wise to
drain off the rest of water.
Problem
WORK indicator light is not
illuminating.
ICE FULL indicator light is
illuminating.
ADD WATER indicator light
is illuminating.
ICE FULL and
ADD WATER indicator
lights are both illuminating.
Ice making performance is
not good. Abnormal noise.

Technical Data

Model:.................................................................... EWB 3526
Voltage supply: ......................................... 220 - 240 V~, 50 Hz
Power input: ....................................................................0.8 A
Ice cube production: ..................................... 10 - 15 kg / 24 hrs
Water tank volume: .....................................approx. 2.2 Litres
Refrigerant: ......................................................... R600a / 24 g
Blowing gas: ................................................................... C
Protection class: .....................................................................
Climate class: ..................................................... SN / N / ST / T
Net weight: ..................................................... approx. 10.5 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
EWB3526_IM_new2

Troubleshooting

Possible Cause
Power Source is not switched on.
1. Ice fullness.
2. Low-temperature protection
(temperature is lower than 5 ºC).
Water Shortage.
Ice Making box is inserted in wrong
position.
1. Heat elimination is bad.
2. Water temperature is too high.
3. Ambient temperature is too high.
4. Refrigerant leaks.
Fan or pump is damaged.
H
5 10
• Close the residual water drain valve after the residual
water has been drained.

Storage

• We recommend that you keep the appliance in the
original packaging if you do not intend using it for long
periods.
• Always keep the appliance out of the reach of children in
a dry, well-ventilated place.
Solution
1. Check the power supply matches.
2. Check the power cord is connected correctly.
3. Internal components are damaged. Maintenance in
professional department.
1. Remove the full Ice cube.
2. Move the Ice maker to a warmer place, where the
ambient temperature is higher than 5 ºC.
1. Add drinking water into Ice maker, and press
button.
2. Water supply system is damaged. Maintenance in
professional department.
1. Check whether any foreign body stuck the Ice
making box.
2. Internal components are damaged. Maintenance in
professional department.
1. Clean the dust on the cooling fan and air inlet / outlet
part.
2. Fill normal temperature water.
3. Do not place the appliance in high temperature
conditions.
4. Refrigerating system is damaged. Maintenance in
professional department.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
39
08.05.19