Assembling The Unit - Stihl BT 130 Manual De Instrucciones

English
spark arrester. Other states or
governmental entities/agencies, such as
the U.S. Forest Service, may have
similar requirements. Contact your local
fire agency or forest service for the laws
or regulations relating to fire protection
requirements.
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
For any maintenance of the emission
control system please refer to the
maintenance chart and to the limited
warranty statement near the end of the
instruction manual.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store your power tool in a dry and locked
location out of reach of children. Before
storing for longer than a few days,
always empty the fuel tank (see chapter
"Storing the Machine" in the instruction
manual).
10

Assembling the Unit

Fitting activating lever for auger brake
3
1 2
3
Insert the activating lever (1) into
N
the clamp
Place the holder (2) onto the
N
activating lever
Screw in the fastening screws (3)
N
and tighten
Fit the padding
3
Hook the padding (1) with the
N
tabs (2) into the oblong holes in the
handle frame
Fold up the padding
N
Secure the padding to the
N
handlebar with the cling strips (3) –
do not jam the throttle cable
3
BT 130