Inserting Paper - Epson TM-U295 Manual Del Usuario

Inserting Paper

Note:
Do not use wrinkled or curled paper. Be sure to use roll paper that meets
the specifications.
1. Make sure a ribbon cassette is installed in the printer.
2. Turn on the printer. The POWER light comes on.
3. Press the RELEASE button. The RELEASE light comes on to show
that the printer is in release mode. In this mode, paper can be
inserted and removed.
4. Insert the paper from either
the front or the side, as
shown in illustration
the form stopper stops it.
Use the markings on the
side of the printer to judge
how far to insert paper.
5. Check the PAPER OUT light.
When you insert the paper correctly, the PAPER OUT light goes
out. If the PAPER OUT light is still on, remove the paper and
reinsert it.
Troubleshooting
No lights on the control panel
Check that power supply cables are plugged into the printer
correctly, the power unit, and power outlet.
Make sure power is supplied to the power outlet. If the outlet is
controlled by a switch or timer, use another outlet.
The PAPER OUT light is on, and nothing is printing
Paper is not inserted or is not inserted correctly.
The RELEASE light is flashing, and nothing is printed
Indicates an error. Turn off the printer, be sure no paper is jammed,
and turn it back on. If the RELEASE light still flashes, contact a
qualified service person.
5
, until
5
TM-U295 User's Manual 5
English