Placement Of Your Wireless Networking Hardware For Optimal Performance - Belkin N1 Manual Del Usuario

Tarjeta inalámbrica para computadora de escritorio
Ocultar thumbs Ver también para N1:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Introduction
Introduction
Placement of your Wireless Networking Hardware
for Optimal Performance
Your wireless connection will be stronger the closer your computer
is to your wireless router (or access point). Typical indoor operating
range for your wireless devices is between 100 and 200 feet. In the
same way, your wireless connection and performance will degrade
somewhat as the distance between your wireless router (or access
point) and connected devices increases. This may or may not be
noticeable to you. As you move farther from your wireless router
(or access point), connection speed may decrease. Factors that can
weaken signals simply by getting in the way of your network's radio
waves are metal appliances or obstructions, and walls.
If you have concerns about your network's performance that might be
related to range or obstruction factors, try moving the computer to a
position between five and 10 feet from the wireless router (or access
point) in order to see if distance is the problem. If difficulties persist
even at close range, please contact Belkin Technical Support.
Note:
While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating
at its maximum effectiveness, this checklist may help.
1.
Placement of your Wireless Router (or Access Point)
Place your wireless router (or access point), the central connection
point of your network, as close as possible to the center of your
wireless network devices.
To achieve the best wireless network coverage for your "wireless
clients," (i.e. computers enabled by Belkin Wireless Notebook Cards,
Wireless Desktop Cards, and Wireless USB Adapters):
Ensure that your wireless router's (or access point's) antennas
are parallel to each other, and are positioned vertically (toward
the ceiling). If your wireless router (or access point) itself is
positioned vertically, point the antennas as much as possible
in an upward direction.
In multistory homes, place the wireless router (or access point) on a
floor that is as close to the center of the home as possible. This may
mean placing the wireless router (or access point) on an upper floor.
Try not to place the wireless router (or access point) near a
cordless 2.4GHz phone.
2
2
Tabla de contenido

Solución de problemas

loading

Tabla de contenido