Evolution EB225DWSHH Manual De Instrucciones página 12

BUILD
®
ASSEMBLY
ASSEMBLY
Some minor assembly is required to prepare
the EB225DWSHH for use.
• Attach the Side Assist Handle to the
machine by screwing it into the preferred
boss on the left hand or right hand side
of the machine. (Fig. 1)
Fig. 1
• Attach the Carry Strap to the main body
of the machine (if required) by clipping it
to the dedicated attachment pins. (Fig. 2)
Fig. 2
• Push the Dust Extraction Hose onto the dust extraction port on the machines
main body. (Fig. 3)
12
UK
Fig. 3
OPERATION
OPERATION
Fitting or removing an
Abrasive Sanding Disc
WARNING: Only remove or replace an
abrasive sanding disc with the machine
disconnected from the power supply.
Note: Only use sanding discs which are
specifically designed for use in this machine.
This machine uses a hook and loop system
which enables very quick changes of the
abrasive sanding disc. The hooks on the Power
Driven Backing Pad engage with the loops on
the back of the abrasive sanding disc.
To fit an abrasive sanding disc:
• Place the new abrasive disc accurately
onto the Backing Pad.
• Press it firmly by hand into place.
• Be careful to ensure that the nine (9)
holes in the abrasive sanding disc line up
perfectly with the nine (9) holes in the
Backing Pad. (Fig. 4)
Fig. 4
UK