Symbol Description; Intended Use Of This Power Tool; Prohibited Use Of This Power Tool - Evolution EB225DWSHH Manual De Instrucciones

are taken.
b) Never place your hand near the
rotating accessory. Accessory may
kickback over your hand.
c) Do not position your body in the area
where power tool will move if kickback
occurs. Kickback will propel the tool in
direction opposite to the wheel's
movement at the point of snagging.
d) Use special care when working
corners, sharp edges etc. Avoid
bouncing and snagging the accessory.
Corners, sharp edges or bouncing have
a tendency to snag the rotating accessory
and cause loss of control or kickback.
e) Do not attach a saw chain
woodcarving blade or toothed
saw blade. Such blades create frequent
kickback and loss of control.
SAFETY WARNINGS SPECIFIC FOR SANDING OPERATIONS
a) Do not use excessively oversized
sanding disc paper. Follow
manufacturers recommendations,
when selecting sanding paper.
Larger sanding paper extending beyond
the sanding pad presents a laceration hazard
and may cause snagging, tearing of
the disc or kickback.
WARNING: the operation of any sanding
machine can result in foreign objects
being thrown towards your eyes, which
could result in severe eye damage. Before
beginning power tool operation, always wear
safety goggles or safety glasses with side
shield or a full face shield where needed.
WARNING: If any parts are missing, do
not operate your machine until the missing
parts are replaced. Failure to follow this rule
could result in serious personal injury.
SAFETY LABELS & SYMBOLS
WARNING: Do not operate this machine
if warning and/or instruction labels are
missing or damaged. Contact Evolution
Power Tools for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min -1
Rated speed
~ Alternating Current
n No Load Rated speed
o
Double Insulated
Wear Safety Goggles
Wear Ear Protection

INTENDED USE OF THIS POWER TOOL

UK
WARNING: This product is a Drywall
Sanding Machine and has been designed to
be used with most commercially available
sanding discs. Only use sanding discs
designed for use in this machine and/
or those recommended specifically by
Evolution Power Tools Ltd.
When fitted with a correct abrasive
sanding disc this machine can be used
to sand:
• Drywall walls and ceilings.
WARNING: This machine is not suitable for
sanding materials that may contain asbestos
or lead based products.

PROHIBITED USE OF THIS POWER TOOL

WARNING: This product is a Drywall
Sanding Machine and must only be used as
such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this Instruction Manual.
WARNING: This product is not intended
for use by persons (including children)
with reduced physical, sensory or mental
HAND HELD DRYWALL SANDER
9