Safety Guidelines - Definitions; Important Safety Instructions - Stanley BARFLEX BF0109 Manual De Instruccion

Lúz giratoria
Ocultar thumbs Ver también para BARFLEX BF0109:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BF0109_ManualENSP_061809.qxp
FEATURES
CARACTERÍSTICAS
1
(BACK OF UNIT)
(DETRÁS DE LA UNIDAD)
2
FEATURES
1. 120 volt AC charger
2. 6 volt DC charging port
(for use with 120 volt AC charger)
3 Carabineer hanging hook
4. 26 ultra bright LEDs
5. Charging status indicator LED
6. Pivot tube
7. Light mode pushbutton (High/Medium/Off/Flash)
8. Magnetic base
6/18/2009
2:51 PM
Page 2
3
4
5
6
7
8
CARACTERÍSTICAS
1. Cargador de la CA de 120 voltios
2. Puerto de recarga de la CC de 6 voltios
(para usar con cargador de la CA de 120 voltios)
3. Gancho colgante del carabinero
4. 26 ultra brillantes LEDs
5. Indicador de estado de carga LED
6. Tubo del pivote
7. Botón del modo ligero (alto/medio/apagado/destella)
8. Base magnética
2
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating light. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided,
may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be
followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or
equipment could result in serious injury and property damage. There are certain applications for which tools and
equipment are designed. Manufacturer strongly recommends that this product NOT be modified and/or used for
any application other than for which it was designed. Read and understand all warnings and operating
instructions before using any tool or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause
cancer and birth defect or other reproductive harm. Wash hands after handling.
3
Tabla de contenido
loading

Tabla de contenido