Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
6. Press the SEAL button. After approx 5 minutes, the
white light above the button goes out and the seam
is heat sealed.
7. Press the release buttons (10) on both sides to
open the cover.
8. You have now created a bag. In case you are using
a foil without a prefabricated weld seam, repeat the
steps until the pouch is created.
Vacuum and Heat Seal a Pouch
You can now package the goods into the pre-fabricat-
ed bag.
NOTE:
• Please also note the "Instructions for storing food"
and the chapter "Functions of the switch".
NOTE:
• Bags with liquids should be sealed only! The liquid
could be sucked in. Select the function SEAL only.
1. Open the device by pressing the release buttons
(10) on the left as well as the right side.
2. Place the goods in the bag.
WARNING:
• Always pull the plug before cleaning. Wait until the unit has cooled
down.
• Never submerge the device into water as this could cause an elec-
tric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive mate-
rials.
• Do not use harsh or abrasive detergents.
The housing can be wiped from the inside and the
outside with a slightly damp cloth.
PC-VK1134_Instruction Manual_new2
3. Place the open end of the bag into the vacuum
chamber (11). The air intake (13) may not be
covered.
4. Avoid creases! Smooth out the foil.
5. Press down the cover, until is snaps into place on
both sides with an audible click.
6. Select NORMAL / TURBO and DRY / MOIST as
needed.
7. Press the VAC SEAL button. Once the lights above
the VAC SEAL and SEAL buttons go out, the
operation is completed.
NOTE:
• To cancel the entire operation, press the STOP
button.
• To abort a pumping process to immediately carry
on with heat sealing, press the SEAL button.
8. Press the release buttons (10) on both sides to
open the cover.
Stop Operation
• Pull the plug from the socket.
• Allow the device to cool down for 5 minutes before
packing it away.

Cleaning

• Clean the device as described.
• You can wind up the power cable at the back of the
unit.
• We recommend that you clean the device well and
keep it in its original packaging if you do not intend to
use it for a longer period of time.
• Always store the device in a well-ventilated and dry
place, out of reach of children.

Storage

19.06.18
43
Tabla de contenido

Solución de problemas

loading

Tabla de contenido