Ice and water
Ice maker is
Ice maker hasjust been
not producing
: installed or a large amount
enough ice or ice is
of ice has been used.
ma[formedo
Ice forms in inlet
tube to ice maker,
Wait 24 hours for ice production
to begin or
for ice maker to restock after emptied.
Refrigerator is
leaking water,
i .......................................................................................................
' .....................................................................................................................................................................................
', Water pressure is too low.
Low water pressure can cause valve to leak,
Water pressure must be between
35 to 100
pounds per square inch to function
properly.
A minimum
pressure of 35 pounds per square
inch is recommended
for refrigerators
with
water filters
Change water filter (see page 25).
Water pressure must be between
35 to 100
pounds per square inch to function
properly.
A minimum
pressure of 35 pounds per square
inch is recommended
for refrigerators
with
water filters,
Saddle valve not open
Open saddle valve completely,
Freezer temperature
istoo
See temperature
controls,
page 12 or 16.
high.
Freezer temperature
should be between
0 _to
2°F (--18oto ..17o C).
Plastic tubing
was used to
It is recommended
copper tubing
is used
complete
water connection,
for installation.
Plastic is less durable
and
can cause leakage. The manufacturer
is not
responsible for property
damage due to
installation
or water connection,
Improper
water valve was
See connecting
the water supply,
installed,
pages 9 - l& Serf-piercing
and SAd'(4.7 ram)
saddle valves cause low water pressure and
may dog the line over time, The manufacturer
is not responsible for property
damage due to
: improper
installation
or water connectiom
Water filter is dogged
or
needs to be changed.
Water pressure is too low.