Specific Safety Rules - Homelite HCS3335B Manual De Utilización

Ocultar thumbs

Contenido

página de 98

/ 98
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

EN DE

■ Always cut with the engine running at full speed. Fully

squeeze the throttle trigger and maintain a steady

cutting speed.

■ Do not overreach or cut above chest height.

■ Follow the manufacturer 's sharpening and

maintenance instructions for the saw chain.

■ Only use replacement bars and chains specified by the

manufacturer or the equivalent.

■ Do not operate a chainsaw with one hand. Serious

injury to the operator, helpers, bystanders, may result

from one-handed operation. A chainsaw is intended for

two-handed use.

■ Do not operate a chainsaw when you are fatigued.

Fatigue causes carelessness. Be more cautious

before rest periods and towards the end of your shift.

Never operate a chainsaw when under the influence of

medication, drugs, or alcohol.

■ Use safety footwear. Do not wear loose clothing.

wear protective gloves and clothing(class1), and eye,

hearing, and head protection devices.

■ Heavy protective clothing may increase operator

fatigue, which could lead to heat stroke. During

weather that is hot and humid, heavy work should be

scheduled for early morning or late afternoon hours

when temperatures are cooler.

■ Do not stand on any unstable surface while using

the chainsaw, that includes ladders, scaffolds, trees,

etc. always keep a sound and firm footing.

■ Use caution when handling fuel. Move the chainsaw

at least 10 metres from the fuelling point before starting

the engine.

■ Do not allow other persons to be near the chainsaw

when starting or cutting with the chainsaw. Keep

bystanders and animals out of the work area.

■ Do not start cutting until you have a clear work

area, secure footing, and a planned retreat path from

the falling tree.

■ keep all parts of your body away from the saw

chain when the engine is running.

■ Always carry the chainsaw with the engine stopped

and the brake engaged, the guide bar and saw chain

to the rear, and the Silencer away from your body.

When transporting the chainsaw, use the appropriate

guide bar scabbard.

■ Do not operate a chainsaw that is damaged,

improperly adjusted, or not completely and securely

assembled. Be sure that the saw chain stops moving

when the throttle control trigger is released.

■ Shut off the engine before setting the chainsaw

down. Do not leave the engine running unattended. As

an additional safety precaution, apply the chain brake

DA NO

HU CS RU

English

HU CS RU

prior to setting down the saw.

HU CS RU

■ Use extreme caution when cutting small-size brush

and saplings because slender material may catch the

HU CS RU

saw chain and be whipped toward you or pull you off

balance.

HU CS RU

■ When cutting a limb that is under tension, be alert

HU CS RU

for spring back so that you will not be struck when the

tension in the wood fibres is released.

HU CS RU

■ keep the handles dry, clean, and free of lubricant or

fuel mixture.

HU CS RU

■ beware of carbon monoxide poisoning. Operate the

chainsaw only in well-ventilated areas.

HU CS RU

■ Do not climb a tree to use the chainsaw, unless you

CS RU

have been specifically trained to do so.

■ Do not operate the chainsaw from a ladder; this is

extremely dangerous.

■ All chainsaw service, other than the items listed in

HU CS

the instruction manual and all maintenance should be

performed by competent chainsaw service personnel.

HU CS

(For example, if improper tools are used to remove

the flywheel or if an improper tool is used to hold

HU CS

RU RO

the flywheel in order to remove the clutch, structural

damage to the flywheel could occur and subsequently

HU CS

RU RO

could cause the flywheel to burst.)

■ Always have a fire extinguisher available when

HU CS

RU RO

using a chainsaw.

HU CS

■ Use only the replacement guide bars and low

RU RO

kickback chains specified for the saw.

HU CS

RU RO

■ Do not adapt the powerhead to a bow guide or use

it to power any attachments or devices not listed for

HU CS

RU RO

the saw.

■ The petrol powered saw is intended for infrequent

HU CS

RU RO

use by homeowners, cottagers, and campers, and for

such general applications as clearing, pruning, cutting

HU CS

RU RO

firewood, etc. It is not intended for prolonged use.

Prolonged periods of operation can cause circulatory

(white finger) problems in the user's hands due to

vibration. For such use, it may be appropriate to use a

saw having an anti-vibration feature.

■ Save these instructions. Refer to them frequently and

use to instruct other users. If you loan someone this

tool, loan them these instructions also.