Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
4.1. Clean air intake filter sponge
01. Turn off the power
02. Remove the dust cup, take out the air filter sponge, and
gently beat it on the trash can to remove the adhered dust;
03. Refill the air filter sponge into the dust cup.
04. After opening the upper wind caver, the filter HEPA is
placed under the filter sponge in the middle of the main
machine. The cleaning method is the same as the filter
sponge.
4.2. Clean air filter HEPA
01. Turn off the power button and retract the power cord.
02. Pull the fan button down and take out the grille.
03. Pull out the air HEPA to the left and take out HEPA.
04. Gently tap the HEPA filter on the trash can to remove dust.
05. Put the HEPA filter back into the machine and caver
the grille back.
NOTE :
- If necessary, flush the HEPA under the faucet and do not
use a brush to avoid damaging the filter material. After
thoroughly drying, it can be reinstalled back to the machine.
- After cleaning, the filter material must be thoroughly dried before reuse. Otherwise, the inside of the
machine may be overheated and dangerous.
- Make sure all filter materials are loaded into the machine before starting the vacuum cleaner and they
are all in place.
Technical specifications of your device
Dimensions (mm): 440 x 277 x 328
Weight (kg): 6,500
Max decibels : 67dB
Capacity: 2,5L
Technology: Cyclonic+
Triple action
TM
Power: 850W
Number of powers: 2
Range: 7 m
Parking Position: Yes
Number of Kpa: 25
Filters: 2 HEPA filters + 2 sponge filters
Filtration technology: 7-stage filtration
Tabla de contenido
