Troubleshooting - Rehan Electronics Looky Manual Del Usuario

Troubleshooting:

En
If the following table does not offer a solution to your problem,
please contact your distributor.
Problem
1 No Picture, dark
or blurry image.
2 Looky cannot be
switched on.
3 Looky switches
itself off within
minutes, sound-
ing a dual-
pitched tone.
4 Looky switches
itself off within
minutes with
a single high
pitched tone
that fades away.
5 Looky switches
off prematurely.
8
Solution
- Switch the Looky on (check if the lighting is on).
- Image is frozen, press the yellow button once.
- Move the Looky closer to the object to get a
sharper image.
- Switch the viewing mode to colour.
- Keep one of the buttons pressed for an extended
period of time. Repeat several times if necessary.
- Charge the batteries.
- Place and / or check the polarity of the batteries.
- Check if the battery contacts are suffi ciently clean.
- The Looky switches itself off if it cannot detect
movement on the screen for 3 minutes.
- Charge the batteries.
- Check the battery type (NiMh). Alkaline or other non-
chargeable batteries can severely shorten the usage.
- Check if the battery contacts are suffi ciently clean.
- Replace with new batteries with a capacity
≥ 2500mAh.
- Check the battery type (NiMh). Alkaline or other non-
chargeable batteries can severely shorten the usage.
- There are many variables that can affect the battery
capacity negatively. In any case, use batteries with a
capacity ≥ 2500mAh.