Reverse polarity protection
Reverse polarity protection
The charger is protected against incorrect startup. In the event of a faulty power
connection, if the voltage falls below 7.5 V while using 12 V batteries or if the voltage falls
below 3.7 V while using 6 V batteries, the charger remains in standby mode.
•
In the event that the polarity of the clamps is reversed (incorrectly connected),
is displayed.
•
If the clamps are not correctly connected and the electric circuit is not closed, the
display shows
•
If the battery itself is defective,
You cannot operate the charger.
24
.
lights up in the display.