Care & Maintenance - iHealth Lina Manual Del Usuario

Scale display shows "Lo. "
Scale displays shows "Er 0. "
Scale display shows "Er 1. "
Scale displays "Er 2. "
Scale displays "Er 4. "
Scale displays "Er 9. "
Scale displays "Er10. "
CARE & MAINTENANCE
1. Avoid high temperatures and irradiation.
2. If the Scale is stored stored at freezing point, allow it to resume
to room temperature before use.
3. Do not attempt to disassemble the Scale.
4. Remove the batteries if the Scale is not going to be used for 3
months or more.
5. Clean the Scale with a soft damp cloth. Do not use abrasive or
solvent-based cleaners, and never immerse it in water.
6. The device will maintain its safety and performance features for
at least 3,000 measurements.
Battery level is low.
The Scale failed to initialize.
Maximum weight has been
exceeded.
The Scale can't capture a
steady reading.
Bluetooth connection error.
Scale memory access error.
Software update error.
9
Change the batteries.
Remove the batteries,
wait for one minute,
then reinstall them.
The maximum weight
allowed is 400 lb/180 kg.
1. Allow the Scale to shut
o completely before trying
again.
2. Place feet on the center of
glass platform and stand still.
Reset the Bluetooth connec-
tion by turning it o and on
in your mobile device setting.
Remove the batteries, wait
one minute, then reinstall.
Refer to the "Software
Update" section for
instructions.