Cleaning And Maintenance - nedis RDFM5010 Serie Manual De Uso

página de 161

/ 161
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Advice for better reception

•

FM: Fully extend the telescopic antenna and position it for better reception.

•

AM: The device has a built-in antenna. Change the position of the device if reception is

poor.

Frequency adjustment

•

Tune in the desired station by rotating the frequency scale. Rotating clockwise increases

and rotating counter-clockwise decreases the frequency.

•

The current adjusted frequency for selected band can be read on the frequency scale.

AUX-in function

It can be used for listening music from any kind of audio reader device (MP3 etc.).

Connect a cable (double 3.5 mm jack–not included) between the audio reader and the line-in

jack of the radio (on the side of the radio).

Select the desired music. Adjust the volume with the radio volume control.

If you do not use the aux in function, take out the 3.5 mm aux plug from the radio and the

unit and enter to power management mode.

Tone control

Adjust the tone by rotating the tone knob. By rotating to the left the bass is intensified,

rotating to the right intensifies the treble.

GENERAL OPERATION FOR Bluetooth® WIRELESS TECHNOLOGY

1. Place the radio and device where they are no more than 10 meters apart.

2. Select FM or AM with the FM/AUX/AM select button.

3. Activate the Bluetooth® function of the device and set it to search for Bluetooth®-enabled

devices.

4. While searching for the device, the radio LED indicator flashes.

5. Wait until "DR70BT" appears in the list of your Bluetooth® device.

6. Select "DR70BT".

7. When Bluetooth® connection is made, the radio LED indicator is on.

8. Press the play/pause button for playing or pausing the music.

9. Press the track buttons to select tracks.

10. Adjust the volume & tone control located on the top of the radio for desired volume level

and high-low tone level.