AMBROGIO BASIC Manual De Uso página 57

3-Mark the areas, located in a
lower position compared to
the lawn surface (pools, areas
with significant drops, stairs,
etc.) (see example in figure)
Important
Strictly respect the distances to
avoid that the robot falls with the
risk of breaking and/or seriously
getting damaged.
4-Mark and trace the perime-
ters as shown in the figure.
– With small paths at the same
height as the lawn: 5 cm
– With small paths higher than
the lawn: 35 cm
– In presence of a fencing wall:
35 cm
– The passage paths (at the
same level of the lawn), neces-
sary for the robot to pass from
one area to the other, must not
be marked.
PERIMETER WIRE INSTALLATION
The perimeter wire may be laid un-
derground or on the ground.
Important
Start laying the perimeter wire
from the installation area of the
power supply-transmitter unit
and leave a couple of metres in
order to cut it accordingly during
the connection stage to the unit.
elevated area
perimeter wire
pedestrian crossing
pedestrian crossing
perimeter wire
perimeter wire
- 15 -
pool
IDM - 41501601300.tif
GB
perimeter wire
wall
IDM - 41501601400.tif
IDM - 41501601600.tif
User's manual