General Maintenance; Alarms; General Maintance - Whirlpool AGB 259/WP Manual De Usuario

E020401CW
on the display appears "SELECT A PROGRAM";
the machine can restart with a new program. If the
signal persists switch off the machine, take off all
the feedings and call technical assistance
GAS PRESSION
It appears only in machines with gas heating; a
fall of alimentation has occured. The buzzer rings
and the machine stops. Pressing STOP the alarm
disappears and on the display appears "SELECT
A PROGRAM"; the machine can restart with a
new program. If the signal goes on switch off the
machine, take off all the alimentations and call
technical assistance.
ATTENTION: We recommend to
call
assistance every time a failure
occurs.

14. GENERAL MAINTENANCE

Servicing and maintenance of the machine must
be performed only by experienced technicians:
before servicing be sure to take off power supply
and either gas or steam connection according to
the type of heating.
The following operations must be performed
regularly
DAILY
Clean the lint filter after every third or forth load.
Control the filter and replace it if torn.
Turn off power supply and either gas or steam
connection according to the type of heating after
working.
WEEKLY
Clean lint accumulation from lint chamber,and
temperature probe (as from the example)
for authorised technical
15
26/11/04