Service Information - BLACK&DECKER BSL112-LA Manual De Instrucciones

Ocultar thumbs

Contenido

página de 17

/ 17
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

2. To turn the unit ON, slide the spring-loaded power switch to the ON position (up).

3. To turn the unit OFF, release the spring-loaded power switch. It will slide back to the

OFF position (down).

USING THE HANGING HOOK

The Hanging Hook allows you to position the unit for convenient, hands-free operation.

CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:

• When Hanging Hook is in use, do not shake light.

• When light is hung by the Hanging Hook, do not shake the light or object that it is hanging

from. Do not hang the light from any electrical wires or anything that it is not secure.

• Only use the Hanging Hook for hanging this unit. The Hanging Hook is not intended to

support additional weight. Do not attach or hang anything additional to the light or risk of

CARE AND MAINTENANCE

breakage may occur.

This unit is NOT waterproof. Never submerge this unit in water. If it gets dirty, gently clean

the outer surfaces with a soft cloth moistened with a mild solution of water and detergent.

Fuse Replacement (Fused DC Plug)

If the unit is plugged in to a functioning 12 volt DC power source, but will not light, the

internal 8 amp fuse in the Fused DC Plug may be blown.

1. Unscrew the flange of the Fused DC Plug (counterclockwise).

2. Remove the end contact, flange and fuse.

3. Inspect the fuse to see if it is good or blown.

4. Replace with a new 8 amp fuse, if needed.

5. Carefully reassemble the fuse, end contact and flange. Do not overtighten the flange

(clockwise).

WARNING: The use of any accessory not recommended for use with this tool could be