cecotec IRONMIX Manual De Instrucciones página 17

Tabla de contenido
· Timer
Timer: (Timer range: 1 second-60minutes). Clockwise rotation (+); counterclockwise rotation
(–). 1-60 seconds: The time can be increased or decreased in 1 second intervals. 1-10minutes:
The time can be increased or decreased in 30 seconds intervals. 10-60minutes: The time can
be increased or decreased in 1 minute intervals. When the timer has been set, the time on the
LCD display will show a countdown and the appliance will emit "beep" sounds at the end of said
countdown (...5, 4, 3, 2, 1). If no timer has been set, the LCD will start counting upwards (1 2 3 4
5...) up to 60 minutes.
· Temperature
Clockwise rotation (+); counterclockwise rotation (–). Temperature range: 20 ºC - 120 ºC. The
temperature increases in 1 ºC intervals. When you wish to adjust the temperature with the
knob, the LCD will show the selected temperature and, afterwards, the current temperature
in the jug. Speed range: 1-12 when temperature is under 60 ºC. Speed will be limited to 5 speeds
if temperature exceed 60 ºC. Quick function: When the appliance stops automatically, the
screen will light up and a 5-seconds beep will be emitted.
· Speed
Clockwise rotation (+); counterclockwise rotation (–). Speed range: 1-12. When the temperature
is over 60 ºC, the speed is limited from speed 1 to 5. Immediately after programming the speed,
the appliance will start working.
· Prompt function:
When the appliance stops automatically, the LCD screen will flash and beep for 5 seconds.
· How to install the blade
1. Push the blade through the opening at the bottom of the jar. Make sure that the blade is in the
correct position.
2. Turn the key at the base of the blade.
3. Rotate the key lightly clockwise, to make sure it is locked correctly.
ENGLISH
Timer display
Temperature display
Speed display
IRONMIX
17
Tabla de contenido
loading

Tabla de contenido