Overload Protector; Performance Indicator; Attachments; Suction Control - Sears Kenmore 11659512992 Manual Del Proprietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EDGE CLEANER
Active brush edge
cleaners are on both
sides of the POWER-
MATE
TM.
Guide either
side of the POWER-
MATE
TM
along base-
boards or next to
furniture to help
remove dirt trapped at
carpet edges_
OVERLOAD PROTECTOR
The POWER-MATE
TM
has
built-in protection against
motor and belt damage
should the brush jam. If
the brush slows down or
stops, the overload
.4"
protector button pops up
and shuts off the POWER-
MATE
TM.
The canister
motor will continue to run.
To correct problem: See
TROUBLESHOOTING.
To reset: Push in the overload protector
button.
SUCTION CONTROL
The suction
control allows
you to change
the vacuum
Suction
Suction
suction for
different fabric
and carpet weights. Opening the control
decreases
suction for draperies and
lightweight
rugs, while closing the control
increases suction for upholsteries
and
carpets.
WARNING
Personal Injury
Hazard
Always unplug the vacuum
cleaner
before cleaning the brush area as
brush may suddenly
restart.
Failure
to do so can result in personal
injury.
CANISTER
PERFORMANCE
INDICATOR
SOME
MODELS
Canister
Performance
Indicator
Light
The light comes on
whenever the air-
flow becomes
blocked, dust bag
needs changing or
canister safety filter
needs cleaning°
NOTE: The light may also come on when
using certain attachments,
due to reduced
airflow through attachment
PERFORMANCE INDICATOR
SOME
MODELS
When the unit is running
(000
000_
the lines in the indicator
windows will be clear if
there are no clogs. When the lines turn
completely
red there is a need to check the
dust bag for being full of the other areas
that may be clogged. See HOW YOUR VAC-
UUM WORKS.
NOTE: Red lines may appear when using
attachments
or when cleaning new carpet,
due to reduced airflow by the attachments
themselves
or new carpet fuzz filling the
bag quickly_
POWER-MATE
TM
STORAGE
SOME
MODELS
The lower wand has a "U" shaped flange in
the area where the power cord attaches
The base has a "U"
shaped slot near the
front caster.
The flange allows the
wands and POWER-
MATE
TM
to be stored with
the canister to conserve
storage space° The cam
ister must be stored on
end for this feature to be
used.
The wand will slip out of the slot as it is lift-
ed up for use and will slide into the slot as it
is lowered for storage.
11

Capítulos

Tabla de contenido
loading

Tabla de contenido