Cameo EVOS W7 Manual De Usuario página 20

Dimmer Selection of
dimmer curve,
dimming
behaviour and
PWM frequency
Color color calibration
Calibration
Pan/Tilt Device head
Motors settings
Fan Set- Fan control
tings
20

Curve 
Linear
Exponential
Logarithmic
S-Curve
Response

LED Response
Halogen Response
PWM 
800 Hz, 1200 Hz,
2000 Hz, 3600 Hz,
12 kHz, 25 kHz

User Calibration 
Red Balance 125–255
Green Balance 125–255
Blue Balance 125–255
White Balance 125–255
Raw R, G, B and W with
maximum brightness
Factory Cali- Factory calibration of R,
bration G, B and W

Pan/Tilt Speed 000–255
Pan Reverse 
Normal
Reversed
Tilt Reverse 
Normal
Reversed
Sensors 
ON
OFF
Move In Black 
OFF
ON

Automatic
The fan speed is automatically adjusted to the temperature in the device head
Normal Reduced maximum fan speed, resulting in slightly reduced brightness if
necessary
Silent Consistently low fan speed with reduced brightness if necessary
Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower
DMX values and broadly adjusted at higher DMX
values
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
Light intensity can be finely adjusted at lower
and higher DMX values and broadly adjusted at
medium DMX values
Lamp responds abruptly to changes in DMX value
Spotlight behaves like a halogen spotlight with
soft brightness changes
User-defined calibration of R, G, B and W
The raw mode is always active with pixel control
Does not reverse pan direction
Reverses pan direction
Does not reverse tilt direction
Reverses tilt direction
Automatic position correction is enabled
Automatic position correction is disabled
No blackout during head movement
Blackout during head movement