Disposal Information; Before Using For The First Time - Siemens VS04G Serie Instrucciones De Uso

en

Disposal information

Packaging
The packaging is designed to protect the
vacuum cleaner from being damaged during
transportation.
It is made of environment-friendly materials
and therefore can be recycled.
Dispose of packaging which is no longer
required at recycling points.
Used vacuum cleaners
Used vacuum cleaners still contain many
recyclable materials.
Therefore, please take used vacuum cleaners
to your retailer or recycling centre so that they
can be recycled.
Please enquire about current disposal
methods at your retailer or local council.
Please note
!
The mains socket must be protected by a
16 amp fuse.
If a fuse is be tripped when you switch on the
vacuum cleaner, this may be because other
electrical appliances which have a high
current draw are connected to the same
power circuit.
To prevent the fuse from tripping, select the
lowest power setting before switching the
vacuum cleaner on, and increase the power
only once it is running.
Fold out picture pages.

Before using for the first time

1*
Figure
Push the handle onto the flexible tube and
until it engages.
Setting up
2
Figure
a) Push the hose connector into the opening on
the vacuum cleaner until it engages.
b) To remove the flexible hose, press the two
lugs together and pull the hose out.
3*
Figure
Connect the handle and the suction pipe
together.
4*
Figure
Connect the floor tool and suction
hose/telescopic tube together.
5*
Figure
a) Connect the suction pipes together.
b) Disconnect the telescopic tube and adjust its
length by moving the adjusting button/sliding
sleeve in the direction of the arrow.
6
Figure
Holding the power cord by the plug, pull out
the required length and plug it into the mains
socket.
7
Figure
Press the on/off button in the direction of the
arrow to switch your vacuum cleaner on/off.
8
Figure
Adjust the suction by turning the on/off button
in the direction of the arrow.
9