Whirlpool W10746870A Manual De Uso página 17

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WINTER
STORAGE
CARE
IMPORTANT: To avoid damage, install and store washer/dryer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer/dryer.
If storing or moving
during freezing weather, winterize your washer/dryer.
To winterize
washer/dryer:
1, Shut off both water faucets, disconnect
and drain water
inlet hoses.
2, Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE cycle for about 30 seconds to mix
antifreeze and remaining water.
3, Unplug washer/dryer
or disconnect
power.
r
REINSTALLING/USING
WASHER/DRYER
AGAIN
To reinstall washer/dryer
after non-use, vacation, moving,
or winter storage:
1. Refer to Installation Instructions to locate, level, and
connect washer/dryer.
2. Before using again, run washer/dryer
through the following
recommended
procedure:
To use washer/dryer
again:
1, Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
(continued
in next column)
in the U.S.A.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death,
fire, or electrical shock.
in Canada
Electrical Shock Hazard
Plug into a grounded
4 prong outlet.
Failure to do so can result in death or electrical
shock.
2. Plug in washer/dryer
or reconnect power.
3, Run washer through a complete cycle to clean washer
and remove antifreeze, if used. Use half the manufacturer's
recommended
amount of detergent for a medium-size
load.
17
Tabla de contenido

Solución de problemas

loading

Tabla de contenido