Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Aire ACP9001 Inglés_Maquetación 1 04/01/18 17:39 Página 114
NOTE:
- Timer setting range: 0.5~24h
- The interval between two motions can't exceed 5s, otherwise the
remote controller will exit setting status.
FUNCTION INTRODUCTION FOR COMBINATION
BUTTONS
CHILD LOCK FUNCTION
Pressing "+" and "-" buttons simultaneously can turn on or turn off
child lock function.
When child lock function is started up, LOCK indicator on remote
controller is ON.
If you operate the remote controller, remote controller won't send
signal.
TEMPERATURE DISPLAY SWITCHOVER FUNCTION
Under OFF status, pressing "-" button and "MODE" button simultane-
ously can switch between °C and °F.
LIGHT FUNCTION
Under switch-on or switch-off state, you may hold "+"and "FAN" but-
tons simultaneously for 3 seconds to set the lamp on or off and send
the code. After being energized the lamp is defaulted on.
OPERATION GUIDE
1. After putting through the power, press "ON/OFF" button on remo-
te controller to turn on the air conditioner.
2. Press "MODE" button to select your required mode: COOL, DRY,
FAN.
3. Press "+" or "-" button to set your required temperature.
(Temperature can't be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low,
medium and high speed.
- 114 -
E
N
G
L
I
S
H
Tabla de contenido
