Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Aire ACP9001 Inglés_Maquetación 1 04/01/18 17:39 Página 113
Press this button under cool and dry mode to start up x-fan function.
Press this button again to cancel x-fan function.
NOTE:
- When x-fan function is on, if the air conditioner is turned off, indoor
fan will still operate at low speed for a while to blow the residual
water inside the air duct.
- During x-fan operation, press X-FAN button to turn off x-fan func-
tion. Indoor fan will stop operation immediately.
Under Cool mode, press this button to turn on Sleep function. Press
this button to cancel Sleep function. Under Fan mode, this function is
unavailable.
- When unit is on, press this button to set Timer Off. T-OFF and H
icon will be blinking. Within 5s, press + or - button to adjust the time
for Timer Off. Pressing + or - button once will increase or decrease
the time by 0.5h. Holding + or - button for 2s, time will change
quickly. Release the button after your required set time is reached.
Then press TIMER button to confirm it. T-OFF and H icon will stop
blinking.
- When unit is off, press this button to set Timer On. T-ON and H icon
will be blinking. Within 5s, press + or - button to adjust the time for
Timer On. Pressing + or - button once will increase or decrease the
time by 0.5h. Holding + or - button for 2s, time will change quickly.
Release the button after your required set time is reached. Then
press TIMER button to confirm it. T-ON and H icon will stop blinking.
- Cancel Timer On/Off: If Timer function is set up, press TIMER but-
ton once to review the remaining time. Within 5s, press TIMER but-
ton again to cancel this function.
- 113 -
E
N
G
L
I
S
H
Tabla de contenido
