Fm Transmission Setting; (Option Exclusive Only Some Models - Specified On The Product Packaging); Brightness Setting - Multilaser GP033 Manual Del Usuario

GP033. GP034. GP035. GP036. GP037. GP038 . GP039

7.2 FM transmission setting

FM transmission main function is output audio of navigator to the FM reception equipment, click the "volume
setting interface" button
[Note]: Navigator FM transmitting frequency must be the same with the reception equipment's received fre-
quency; Do not use has broadcasting station's frequency, in order to avoid the broadcasting station signal and
the navigator signal disturb mutually.
Close
Frequency -
Frequency +
Start FM function
Current frequency

7.3 Brightness Setting

The back light setting is to adjust the brightness, as shown in Figure 7-3:
GP033_GP039_manual_hardware_V2_RV1_CV.indb 65
(Option exclusive only some models - specifi ed on the product packaging)
, and enter into "FM transmission setting interface", as shown in 8-3 picture.
Click to quit the frequency adjusting application.
Click to decrease the frequency in one grade (pergrade: 0.1MHz).
Click to increase the frequency in one grade (per grade: 0.1MHz).
Select express FM transmission function starting, contrarily express
closing.
Show the current frequency of FM.
65
22/09/2014 13:44:02