Operation
Using the dryer
1. Open the door,
2. Check lint filter,
The filter should be cleaned
after and before every drying
process.
Cleaning the filter
reduces the drying time and
saves energy.
3. Rotate program
selector to the
desired program.
Select the program which
corresponds
to the laundry in
the dryer from the program
selection
table (see page 19).
The dryer light turns on inside
the drum.
[_The
estimated
remaining
time
will be indicated.
[_
Lint filter indicator flashes for
5 seconds
-
Check hnt filter.
4. if required,
select "Option" by
pressing the button.
The "Options"
are explained
on
page t 8.
[_The
estimated
remaining time
will be updated.
5. Place laundry in the empty
drum. Put each piece of laundry
into the machine separately,
For best results the laundry to
be dried must be sorted
according
to type of laundry
and desired degree of drying.
For further information
see
page t 7.
[_
Observe drying symbols of the
laundry manufacturer,
If drying
woolen clothing and shoes, see
the information
on page 2t.
Ensure that there is only
laundry in the drum. Check that
all items are completely
in the
drum,
6. Close the door.
The "Start/Stop"
indicator
light
starts flashing.
[_tf
the door has not been closed
properly, the dryer will not start,
7. Press the "Start/Stop"
button.
The "Start/Stop"
indicator
light
illuminates.
[_The
program starts with an
acoustic
signal (if set).
If a standard
program
has been
selected,
the indicator
lights
indicate the progress
of the
program
sequence,
[_At
the end of the program
damp
dry an acoustic signal is
emitted
(if set),
_iintfilter
[_At
program end an acoustic
signal is emitted (if set) and the
LED "wrinkle blocWfinished"
illuminates.
[_
When the drying process is
complete
(program
or selected
time program
ended), the drum
rotates at specific intervals for
t hour.
This prevent the laundry from
creasing.
The laundry remains
loose and fluffy until it is
removed.
The laundry should be removed
before this time has elapsed.
2O