koban KMD 50000 Manual De Instrucciones página 132

True RMS
Digital Multimeter User Manual
7-10. Replacing the Batteries
Refer to Figure and replace the batteries
as follows:
1 .Turn the Meter off and remove the
test
leads from the terminals.
2. Remove the battery door assembly by using
a standardblade screwdriver
to turn
the battery door screw one-half
turn
counterclockwise.
3. Replace the batteries with 7.4 volt charge batteries Observe proper polarity.
4. Reinstall the battery door assembly and
secure it
by turning the
screw one-half
turn
clockwise.
7-11. Replacing the Fuses
Referring to Figure
, examine or
replace
the Meter's fuses as follows:
1 .Turn
the Meter off and remove the test leads from the
terminals.
2. Remove the battery door assembly by using
a standardblade screwdriver
to turn
the battery door screw one-half turn counterclockwise.
3. Remove the fuse by gently prying one end loose, then
sliding the fuse out of its bracket.
4. Install only specified replacement fuses.
5. Reinstall the battery door assembly and secure it by turning the screw one-half
turn clockwise
m
m
h
—
1/