Idiomas disponibles
Idiomas disponibles
True RMS
Digital Multimeter
User Manual
5-2. DC
Voltage
Measurements
CAUTION: Do not measure DC voltages if a motor on the circuit is being
switched ON or OFF. Large voltage surges may occur that can
_
damage the meter.
_
1. Set the function switch to the green VDC position.
2. Insert the black test lead banana plug into the
negative COIVI jack. Insert the red test lead banana
plug into the positive V jack.
3. Read the voltage in the display.
100.00
"
v-
V
- \
1
+
5-3.
AC
+
DC
1
.Set the function switch to the green VDC
position.
2.lnsert the black test lead banana plug into
the
negative
COM
jack. Insert the red test
lead bananaplug into the positive jack
3. Press the MODE button to indicate
"AC+DC"
on the display.
4. Read AC+DC measurement value in the
display.
o
»))
<m
Auto range
08: 1 2pm
VAC+DC
0.0276
0.0000
V-
0.0276
v-«
GRAPH
MODT
SAVE
l
MAX
Capítulos
