Oster 6014 Manual De Instrucciones página 8

USING THE IRON'S SPECIAL FEATURES
The SPRAY MIST® feature is a powerful water spray mist that dampens the fabric to
aid in removing wrinkles from heavy fabrics and for setting creases.
To use the SPRAY MIST® Feature: Press the SPRAY MIST® Button firmly.
The SHOT OF STEAM® feature provides an extra burst of steam for deep penetration
of stubborn wrinkles. You can use this feature while dry or steam ironing, but the Water
Reservoir must be at least 1/4 full of water.
To use the SHOT OF STEAM® feature: Place the Iron on top of the wrinkle and press
the SHOT OF STEAM® Button each time you would like an extra burst of steam. The
SHOT OF STEAM® feature may be used continuously with just a short pause
between shots.
Vertical Steam and Vertical Shot of Steam
The Vertical Steam feature allows your Iron to function as a garment steamer.
TIP: When using the Vertical Steam on clothing, hang the clothing on a clothes hanger
for best results. Hanging curtains and drapes may also be steamed.
To use Vertical Steam:
1. Make sure that the Iron has heated up (2 minutes).
2. Hold the Iron in a vertical position, with the Iron close to but not touching the fabric
you want to steam.
3. With your other hand, pull the fabric tight.
4. Press the SHOT OF STEAM® Button for approximately 3-second intervals as you
move the Iron across the wrinkled area.
WARNING: To prevent the risk of burns, keep your hands away from the area being
steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
Spray Mist® Feature
Shot of Steam® Feature
7