Basic Hookup Methods - Sanyo DS25520 Manual Del Propietário

QuickTips
The TV will automati-
I
cally select the correct
Antenna mode for the
type of signal you
connect.
TV will switch off
I
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception—When the
Video mode is selected,
the TV will not automati-
cally switch off when
signal reception has
stopped for 15 minutes.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to
the cable company's service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor
or indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect
your cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR and TV
CABLE BOX
c Outdoor or Indoor Antenna with VCR and TV
d Satellite Dish with Receiver, VCR and TV
VCR
ƒ
„
See page 12, Using the
rear Audio/Video jacks.
VCR
ƒ
VCR
ƒ
„
VCR
ƒ
RECEIVER
TV BACK
TV BACK
TV BACK
TV BACK
75 OHM Terminal
Use the 75 ohm terminal
to connect a VCR, cable,
cable box, outdoor/
indoor antenna or satellite
receiver directly to the TV.