Basic Hookup Methods - Sanyo DS20930 Manual Del Propietário

QuickTips
The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.
TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception—When the
Video mode is selected,
the TV will not automati-
cally switch off when
signal reception has
stopped for 15 minutes.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to
the cable company's service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor
or indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect
your cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR and TV
CABLE BOX
IN OUT
c
Outdoor or Indoor Antenna with VCR and TV
d Satellite Dish with Receiver, VCR and TV
VCR
IN
FROM ANT.
OUT
OUT TO TV.
See page 10, Using the
rear Audio/Video jacks.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
RECEIVER
CATV IN
CH3
CH4
VIDEO
OUT TO TV S-VIDEO
VIDEO
TV BACK
AV2 INPUT
R
AUDIO
L
S-VIDEO
UHF / VHF / CATV
(MONO)
75Ω
VIDEO
TV BACK
AV2 INPUT
R
AUDIO
L
S-VIDEO
UHF / VHF / CATV
(MONO)
75Ω
VIDEO
TV BACK
AV2 INPUT
R
AUDIO
L
S-VIDEO
UHF / VHF / CATV
(MONO)
75Ω
VIDEO
TV BACK
AV2 INPUT
R
AUDIO
L
S-VIDEO
UHF / VHF / CATV
(MONO)
75Ω
VIDEO
L- AUDIO -R IN FROM
SAT.
L- AUDIO -R
75 OHM Terminal
Use the 75 ohm terminal
to connect a VCR, cable,
cable box, outdoor/
indoor antenna or satellite
receiver directly to the TV.