Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
3.2.
Thermo E heater installation
The heater is secured with four screws M8 (see Figure 2).
Use washers acc. to DIN 125 if necessary.
320
Fig. 2:
Installation position
Attachment variant
4x Screw M8
82
4x Nut M8
25
Fig. 3:
Hole pattern
38
10°
10°
10°
10°
110
150
D = 4.5 if M4 screws are used
D = 2.9 if sheet screws B 3.9 are used
D
320
3.3.
Model plate
The model plate must be protected from damage and must be clearly le-
gible when the heater is installed (otherwise a duplicate model plate
must be used).
Fig. 4:
Model plate (example)
NOTE
The year of the initial operation must be durably marked by removing the
year numbers that are not applicable.
Thermo E 200/320
2010
2011
2012
Tabla de contenido
