Front Wheel; Rear Wheel - CAMPAGNOLO BORA WTO 2-WAY FIT Manual Del Usuario

3.1 - FRONT WHEEL

• If the FRONT wheel is predisposed for HH12 through-axle mounting follow the mounting instructions provided by the bicycle or fork manufacturer.

3.2 - REAR WHEEL

• If the REAR wheel is predisposed for HH12 through-axle mounting for 142 mm width follow the mounting instructions provided by the frame or bicycle manufacturer.
4 - SPROCKET ASSEMBLY AND REMOVAL
4.1 - 9s, 10s, 11s, 12s SPROCKETS OF CAMPAGNOLO S.R.L.
Refer to the instruction leaflet enclosed with the sprockets for all the assembly, disassembly, use and maintenance operations.
4.2 - 9s, 10s, 11s SPROCKETS FROM SHIMANO INC. AND SPROCKETS FROM SRAM CORPORATION
(on the Campagnolo freewheel body for Shimano Inc. 9/10/11s sprockets and sprockets)
®
IMPORTANT!
WITH THE 11S FREEWHEEL BODY, ONLY USE THE ADAPTER (M - FIG.27) FOR 9S AND 10S SPRO-
CKET PACKS BY SHIMANO INC. AND SRAM CO. (THE ADAPTER MUST NOT BE USED FOR 11S
SPROCKET PACKS BY SHIMANO INC.).
The adapter (M - Fig.27) must be fitted on the freewheel body of the 9s or 10s sprocket pack, or on any
washer supplied together with the 9s or 10s sprocket pack.
See the instruction sheet provided by the sprocket pack manufacturer for installation, removal and main-
tenance instructions.
27
M
13