Backwash Menu; Backwash Setup - Pentair IntelliFlo WhisperFlo VF Guide D’installation

45
External Control Menu (Continued)
c)
To set the Time Delay Stop parameter: U
buttons to scroll to the "Time Delay Stop" setting. Press the Select button
to access it (Default 0, or 00:00). To change the setting, see step 4, below.
4. To change a setting, press the Left and Right arrows to select which digit to
modify, then use the Up and Down arrows to change the selected digit.
5. When you are done, press the Enter button to shave the changes. To cancel any
changes, press the Escape button to exit mode without saving.

Backwash Menu

The Backwash menu is used to set the parameters for Backwash Mode (See page 17 for more information
on Backwash Mode.).

Backwash Setup

To access the Backwash menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Use the Up and Down arrow buttons to scroll to the "Backwash" menu item. Press the Select
button to select it.
a)
To set the Backwash flow rate:
"Backwash Flow" setting (Default 14m
4, below.
b)
To set the Backwash duration: U
scroll to the "Backwash Duration" setting. Press the Select button to access
it (Default 5 minutes, or 0:05). To change the setting, see step 4, below.
c)
To set the Rinse duration: U
to the "Rinse Duration" setting. Press the Select button to access it (Default
1 minute, or 0:01). To change the setting, see step 4, below.
4. To change a setting, press the Left and Right arrows to select which digit to modify, then use the
Up and Down arrows to change the selected digit.
5. When you are done, press the Enter button to shave the changes. To cancel any changes, press the
Escape button to exit mode without saving.
IntelliFlo VF Installation and User's Guide
se the Up and Down arrow buttons to scroll
®
Backwash 8:01 Backwash
14m³/h 0:05
Backwash Flow Backwash Duration
se the Up and Down arrow
Press the Select button to access the
/h). To change the setting, go to step
3
se the Up and Down arrow buttons to
® ®
8:01 Backwash 8:02
0:01
Rinse Duration
®
Program 1 12:16
0:00
Time Delay Stop
®
MENU 7:55
Backwash