Protos Integral Instrucciones De Uso página 9

2. How to exchange parts:
If parts of your Protos® Integral safety helmet become worn or damaged, or if they must be cleaned, they can be
easily exchanged.
2.1 Changing the brow, crown and neck pad:
20
Remove the crown and
neck pad from the Velcro
fastening by pulling on it
and exchange with replace-
2.2 Changing the visor:
23
2.3 Changing the ear piece pads:
Remove the brow pad held by plastic
clips from the brow pad holder and
clip in the new and/or dry brow
pad starting from the right or left.
ment pads.
22
Open the visor, which is
attached to round mounts
on the inside.
Pull strongly to remove the
visor from the mounts.
25
First, remove the ear pro-
tectors from the helmet shell
(also see Fig. 17)
26
21
24
Attach the new visor
to the round mounts
in the open position
again.
Firmly hold the ear piece in your hand
and use your index and middle fi nger to
hook under the pad from the side. The
pad can be removed by lightly pulling
on it.
Now place the new pad on the ear
piece and press down evenly.
09