Gate Placement - Munchkin IT FITS Guia De Instalacion

How to Install
4. Insert the adjustment rods from step 1 into the plastic plugs. To remove the remaining
extension, repeat steps 1-4. If you need to add extensions, simply reverse the
instructions above.

GATE PLACEMENT

This gate is approved for use at the bottom of stairs, as well as in doorways, hallways and
entryways. The gate must be installed between two structurally
sound surfaces.
Do not use this gate in any location without using all 4 wall cups, sticky pads, and screws
provided when installing the gate.
If you are installing the gate at the bottom of the stairs, we recommend placing it on the
floor below the first step. If the gate must be placed on the lowest stair, position it toward
the front of the step.
Be sure that the gate is resting on the floor. The gate should NOT be raised above the
floor >5mm.
7