Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn
off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
DANGER:
Keep hands away from blade. Contact with blade will result in serious personal injury.
• Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in
serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge
trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the
cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring
or its own cord. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
• Keep extension cord away from cutting area. During operation the extension cord may be hidden in shrubs and can
be accidentally cut by the blade.
• Check the hedge for foreign objects, e.g. wire fences.
CAUTION:
Do not expose to rain.
WARNING:
Remove plug from the outlet immediately if the extension cord becomes damaged or cut.
WARNING:
Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• compounds in fertilizers
• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated lumber
To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to
filter out microscopic particles.
SYMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..............................volts
Hz ...........................hertz
min .........................minutes
or DC ..........direct current
..........................Class I Construction
(grounded)
..........................Class II Construction
(double insulated)
....................Read instruction manual before use
..........................Use proper eye protection
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS
SAVE THESE INSTRUCTIONS: THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CHARGERS.
• Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using
battery pack.
WARNING:
SHOCK HAZARD. Do not allow any liquid to get inside charger.
CAUTION:
BURN HAZARD. To reduce the risk of injury, charge only designatedCraftsman batteries. Other types of
batteries may burst causing personal injury and damage.
CAUTION:
Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by
foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of
metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no
battery pack in the cavity. Unplug charger before attempting to clean.
A............................... amperes
W ............................. watts
or AC ............... alternating current
n o ............................ no load speed
............................ earthing terminal
......................... safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
............................ Use proper respiratory protection
............................ Use proper hearing protection
4
Tabla de contenido
