Taurus Mycook 1.8 Manual De Instrucciones página 16

ENGLISH
88 28
Figure 38
BEEP!
00 00
Figure 39
88 28
Figure 40
CAUTION.
Always stop the machine using the speed selec-
tor control. Wait a few seconds until the blades
have come to a complete stop before opening the
jug lid.
Never open the jug lid when the appliance is run-
ning, due to the risk of overflowing and /or burns.
How to process in cold mode:
Turn the control slowly to the right/left to select the
speed operation. The selected speed LEDs light up in
green and the appliance starts up
Once the pre-selected time for the operation in ques-
tion has elapsed, the appliance sounds an audible
warning and the light flashes on and off
To stop:
Turn the speed selector control to the left until the
LEDs turn off.
If the jug or the lid are not properly fitted when the
appliance is started up, an audible warning will sound
and the digital screen will display the information icon
(Figure 42)
After processing in hot mode, the digital screen dis-
plays the following information icon: Jug and tempe-
rature sensor hot (Figure 43).
If you wish to now process in cold mode, you must
allow the jug and temperature sensor to cool down
(Figure 1) by running the jug under the tap, then fit-
ting it into the central unit and waiting for the informa-
tion icon to turn off.
If you are not going to be using the appliance
straight away:
1. Stop the appliance by prising the start/stop switch.
2. Unplug the appliance from the power supply.
16
(Figure 40).
(Figure 41).