Sony SU-WL500 Manual De Instalación página 13

C: portrait, no leaning / D: portrait, +20° leaning
Step 1:
Checking the parts
required for the
installation
Follow Step 1 in the SU-WL500 instruction manual to
check the parts.
Step 2:
Deciding on the
installation location
Follow Step 2 in the SU-WL500 instruction manual to
decide on the installation location. Refer to page 19
of this manual for the TV installation dimension table.
Step 3:
Installing the Base
Bracket on the wall or
mounting
Follow Step 3 in the SU-WL500 instruction manual to
install the Base Bracket.
Step 4:
Preparing for the
installation of the TV
1
Remove the stand if it is
installed to the TV.
Lay down the TV and lay a soft cloth under the
TV to protect the TV monitor.
XBR-75X900E/XBR-65X900E/XBR-55X900E/
XBR-49X900E/XBR-65X850E/XBR-55X800E/
KD-75X9000E/KD-65X9000E/KD-55X9000E/
KD-49X9000E/KD-65X8500E/KD-55X8500E
XBR-49X800E/XBR-43X800E/KD-49X8000E/
KD-43X8000E
When using an electric screwdriver, set the torque
setting to approximately 2 N·m {20 kgf·cm}.
Do not lift the Mounting Hook before the screws
(two screws each for left/right) are secured. This
may distort the Mounting Hook or the TV cabinet.
13
(GB)