Washing Clothes Using The Cycle Selector - Samsung WF409 Serie Manual De Usuario

Steam
The Steam Wash function injects steam directly into the laundry in the wash tub to increase the
wash temperature and enhance the soak effect, thus improving the wash performance.
1. Load the washer.
2. Press the Power button.
3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically
selects the Steam Wash function.)
4. Press the Steam button.
5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked
line.
6. Press the Start/Pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the
laundry.
(_ f steam wash is selected, steam is injected at the most effective time for the detected
amount of laundry in order to maximize the effect of the steam.
Washing clothes using the cycle selector
Your new washer makes washing clothes easy, using Samsung's "Fuzzy Control" automatic
control system. When you select a wash program, the machine will set the correct temperature,
washing time, and washing speed.
1. Almost no customers will have the washer hooked up via the sink's tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the tub, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
[_ re-wash is only available when selecting the Normal, Perm Press, Sanitize, Bedding,
Whites(WF409*), Deep Steam(WF407*) and Heavy Duty cycles. It is only necessary if your
clothing is heavily soiled(WF409* See page 32, WF407* See page 33).
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate Option button.
9. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
To unlock the door when the "Garment+" light is turned on, press the Start/Pause button.
1. Within 5 minutes of starting a wash, you can still add/remove laundry items to the wash.
2. Press the Start/Pause button to unlock the door.
3. The door cannot be opened when the water is too HOT or the water level is too HIGH.
4. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
When the cycle is complete, "End" is displayed and the power remains on.
The power is turned off in the following two cases.
1. When the Power button is pressed.
2. If the door is opened when "End" is displayed.
washng a cad of aundry 21
WF409ANW-02657D-02 EN.indd 21 2009-12-04 L._.,2ti_11:19:43