Orien FS-260IM Manual Del Usuario página 20

will restart and return to the ice-making mode.
2. Ice Making (green) LED: Ice Making indicator light
When this LED is on, the unit is working in the ice-making mode. When the green LED is
flashing, the unit is working in the ice-making mode but approaching the ice harvest mode.
3. Ice Harvest (yellow) LED: Ice Harvest indicator light
When this LED is on, the unit is working in the ice harvest mode controlled by the bin full
probe.
4. I. S. Adjust screw: Ice size adjustment
For service only. Adjustment of this screw by unqualified persons can damage the machine's
controls.
5. Power switch
This is the main switch. When it is turned on, the unit goes into Stand-by mode for about 3
minutes, with all LEDs on, then starts to make ice cubes automatically, switching between
ice-making and ice harvest modes.
6. CLEAN button
While the unit is in Stand-by mode (all LEDs on steady), you can press CLEAN to start the
Automatic Clean procedure. The green and yellow LEDs will flash together.
NOTE: When you finish working with the control panel, close the cover.
IMPORTANT:
Avoid letting water contact the control box.
•
When you finish working with the control panel, close the cover.
•
19