Operation Procedures - H.Koenig WIZ400 Manual De Instrucciones

Pic.1
Operating Instructions

Operation Procedures

1. Unpack the product, check the accessories and documents supplied with the product and
make sure that the product and accessories are not damaged.
2. Before use, please read the User Manual carefully. The window cleaner is only for use in
households.
3. First, place the window cleaner on a level platform.
4. Open the water injection hole cover anticlockwise, take 250ml clean water with measuring
cup, and add the water into the tank. (Max. capacity of the tank is 320ml. Do not overfill
the tank and some space must be left in the tank). Insert the hole cover at right place, and
clockwise until stop. Pic. 1.
5. Check the power supply and socket, and confirm they comply with the requirements given
in the User Manual. Then turn on the on/off power supply. Pic.2.
6. About 20 seconds after power supply is turned on, steam is ready. At this time lightly press
the steam button and check whether steam is sprayed out of the nozzle. (Do not aim the
spray nozzle at other persons or objects). Pic. 2.
7. If there is steam sprayed out, please install suitable accessories according to your needs
after you release the button.
8. Press down the steam button again in order to carry out the operations required by you.
Pic.2
Pic.3