Battery Assembly; Inactivity - Beta Motorcycles RR 350 EFI Manual Del Usuario

THEN remove the cap of the positive pole
3 and disconnect the positive lug 4 (red)
from the positive pole (+).
Release the rubber band 5.
Remove the battery.

BATTERY ASSEMBLY

When fitting the battery, insert it with the
terminals as shown in picture.
Reattach the rubber band 5.
FIRST Connect the positive lug 4 (red) to the
positive pole (+) of the battery by pushing
the protective cap 3 in its position.
THEN secure the negative lug 2 (black) to
the negative pole (-) of the battery by bring-
ing the relative protective cap 1 in position.
Refit the saddle (page 78).

INACTIVITY

If the vehicle is not going to be used for
a long time:
- remove the battery (page 66).
- charge with an adequate charger (page
68).
- store the battery in a dry place. The ideal
temperature for storing the lithium-ion bat-
tery is 20°C.
2
2
1
67
4
5
4
5
4
3
EN