Know Y Our B Lower; Operating Position - Weed Eater VS2000BV Manual De Instrucciones

KNOW Y OUR B LOWER
READ THIS INSTRUCTION MANUAL AND S AFETY RULES BEFORE OPERATING YOUR UNIT
Compare the Jltustrations with your unit to famitJadze yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Upper Vacuum Tube Elbow Tube
Lower Vacuum Tube
STOP
Throtbe Switch
Trigger _ Spark
Plug
Starter Upper Blower Tube
Rope
Fuel Mix
Lower Blower Tube
High-Speed
Nozzle
Fill Cap
Primer
Button
STOP SWITCH
The STOP switch is used to stop the engine.
To stop the engine, push and hold the STOP
switch in the STOP position until the engine
stops.
THROTTLE TRIGGER
The TH RO_LE TRIGGER is used to select
the desired engine speed.
PRIMER BUTTON
The PRIMER BU_ON removes air fcom the
carburetor and fuel lines and tills them with fuel.
This alows you to start the engine with fewer
pulls on the starter rope. AcWate primer button
by pressing it and a,owing it to return to _tsorigi-
nat position
CHOKE LEVER
The CHOKE helps to supply fuel to the engine
to aid in cold starting. AcWate the choke by
moving the choke lever to the FULL CHOKE
position. After engine attempts to start, move the
choke lever to the HALF CHOKE position.
Once engine starts, move choke lever to the
RUN position.
OPERATING POSITION
Blower Vacuum
OPERATING TIPS
• Whi_e vacuuming or blowing debris, hold
the unit with the muffler side facing away
from your body and clothes (see OPERAT-
ING POSITION illustration above).
• To reduce the risk of hearing loss
associated with sound level(s), hearing
protection is required.
• To reduce the risk of injury associated with
contacting rotating parts, stop the engine be-
fore installing or removing attachments Do
not operate without guard(s) in place.
• Operate power equipment only at reasonable
beurs-not early in the morning or late at night
when people might be disturbed. Comply with
times listed in local ordinances Usual recom-
mendations are 9:00 a.m. to 5:00 p.m.,
Monday though Saturday.
• To reduce noise levels, limit the number of
pieces of equipment used at any one time.
-7-