Starting - Oase WECS II 512 DMX/02 Instrucciones De Uso

- GB -
Hauptmenü
7. Master
8. Setup
18.1

Starting

Now connect the device with a 15-24 V power supply. Re-starting the unit takes approx. 20 seconds. After
that the LCD screen displays the main mask of the operating/control system
II 1024/time). If the unit cannot be restarted correctly at this point, please check the voltage supply and
ensure that all connections are tightly fixed.
36
Untermenü 1 Untermenü 2
Grandmaster Set
Grandmaster
Windmaster 1..3
Basic Value 1
Basic Value 2
Basic Value 3
Ramp Down
Ramp Up
Waiting Time
Up
Submaster 1 .. 4 Set Submaster
... 1..4
Caption Edit Caption
Universe DMX1 Select
Universe
Universe DMX2
RDM Mode Enable RDM
DMX1 DMX1(2)
RDM Mode
DMX2
Digital Outputs DO 1 Patch
DO 2 Patch
...
DO 1 Mode
DO 2 Mode
...
Date Edit Date
Time (UTC) Edit Time
(UTC)
Timezone Select
Timezone
IP-Address Edit IP
Subnet-Mask Edit IP-Mask
Software Version
MAC-Address
OS-Version
Licence Info
Untermenü 3 Beschreibung
Show the grandmaster in percent. The value
can be adjusted by using the CURSOR keys
[0..100]%.
Show the selected wind master in percent.
The value will be updated by the wind
speed.
Edit Value 1 Show the interpolation value No.1 of the
characteristic curve.
Edit Value 2 Show the interpolation value No.2 of the
characteristic curve.
Edit Value 3 Show the interpolation value No.3 of the
characteristic curve.
Edit Ramp Down Fading down speed in percent per second of
the windmaster.
Edit Ramp Up Fading up speed in percent per second of
the windmaster.
Edit wait time Waiting time in seconds before the
windmaster is fading up after fading down.
Show the submaster in percent. The value
can be adjusted by using the CURSOR keys
[0..100]%.
The menu Setup contains all important
configuration parameters and information.
The caption label can be changed according
to the project. The text will be shown at the
WEPS software.
The DMX ports can be linked to Universe 1
or Universe 2.
The RDM function can be switched on or off
for each DMX port.
Edit Patch Each digital output can be linked to a DMX
Universe and address.
Change Mode Each digital output can be operated either in
[Standard Standard or in Remnant mode.
/Remanent]
Shows and edits the current date in format:
JJJJ-MM-DD.
Shows the current time as „coordinated
universal time" UTC.
Shows the current time zone. The time zone
can be selected from UTC (coordinated
universal time) and CET (Central European
Time, UTC+1) with daylight-saving time.
CET is the recommended choice.
Shows and edits the IP-Address. Default
setting:
192.168.003.011
Shows edit the subnet-IP mask. Default
setting:
255.255.255.000
Shows the software version label.
Shows the network MAC address.
Shows the current operating system label.
Shows the location of the GPL and
copyrights.
(WECS II 512/time or WECS