Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Outer diameter
11.0 mm
12.3 mm
14.3 mm
14.5 mm
17.5 mm
2. Anchor setting (rotation + striking)
Anchor setting adapter (for electric hammer drill)
Anchor setting adapter
(for electric hammer drill)
Anchor size: W1/4", W5/16", W3/8"
Anchor setting adapter (for manual hammer)
3. Drilling holes in steel or wood (rotation only)
Drill chuck and chuck adapter (Also available for the model exclusively intended for the SDS bit.)
13 mm drill chuck
(including chuck wrench)
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and striking function:
Drilling anchor holes
Drilling holes in concrete
Drilling holes in tile
Rotation only function:
Drilling in steel or wood (with optional accessories)
6
Taper mode
Morse taper
(No. 1)
A-taper
B-taper
Anchor setting adapter
(for manual hammer)
Anchor size: W1/4", W5/16", W3/8", W1/2"
PRIOR TO OPERATION
1. Power source
2. Power switch
Applicable drill bit
Drill bit
(taper shank)
Taper shank adapter formed A-taper or
B-taper is provided as an optional acces-
sory, but the drill bit for it is not provided.
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, which could cause
a serious accident.
11.0 mm
12.3 mm
14.3 mm
14.5 mm
17.5 mm
Tabla de contenido
