Standard Accessories; Optional Accessories (Sold Separately) - Hitachi DH 20V Instrucciones De Manejo

SPECIFICATIONS
Voltage (by areas)*
Input*
No-load speed
Full-load impact rate
Capacity:
Weight (without cord and side handle)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case (Molded plastic) ................................................ 1
(2) Side handle ................................................................. 1
(3) Stopper ........................................................................ 1

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (rotation + striking)
Drill (square shank) (Cannot be attached to the model exclusively intended for the SDS bit.)
Drill bit (square shank)
Outer
diameter
5.0 mm
5.0 mm
5.5 mm
6.5 mm
6.5 mm
7.0 mm
8.0 mm
8.0 mm
Drill bit (taper shank) and taper shank adapter (Cannot be attached to the model exclusively intended for
the SDS bit.)
Drill bit (taper shank)
concrete
steel
wood
Total Outer
length diameter
110 mm 8.5 mm
150 mm 9.0 mm
110 mm 12.0 mm
110 mm 12.0 mm
150 mm 12.7 mm
150 mm 14.0 mm
110 mm 15.0 mm
150 mm 16.0 mm
Taper shank adapter
(110V, 220V, 230V, 240V)
460W
0-900/min
3500/min
20 mm
13 mm
15 mm
3.1 kg
(4) Dust cup ...................................................................... 1
Standard accessories are subject to change without
notice.
Total
length diameter
200 mm 16.0 mm
150 mm 17.0 mm
150 mm 19.0 mm
200 mm 19.0 mm
150 mm 20.0 mm
150 mm
150 mm
200 mm
Cotter
English
Outer Total
length
350 mm
200 mm
150 mm
350 mm
350 mm
5