Fuse Replacement - TECshow ET DUAL Manual De Usuario

Auto Mode

7. FUSE REPLACEMENT

Locate and remove the unit's power cord. Once
the cord has been removed located the fuse holder
located inside the power socket. Insert a flat-head
screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and re-
place with a new one. The fuse holder has a built-in
socket for a spare fuse be sure not to confuse the
spare fuse with active fuse.
036-041 Part 2 Blue
042-047 Part 3 Red
048-053 Part 3 Green
054-059 Part 3 Blue
060-065 Part 4 Red
066-071 Part 4 Green
072-077 Part 4 Blue
078-083 Opposite Two Part Red
084-089 Opposite Two Part Green
090-095 Opposite Two Part Blue
096-101 The other Opposite Two Part Red
102-107 The other Opposite Two Part Green
108-113 The other Opposite Two Part Blue
114-119 All Red
120-125 All Green
126-131 All Blue
132-179 All Full color
180-217 Color Gradual Change
218-255 Color Jump Change
000-027 No Function
028-082 Sound Activity
083-112 No Function
113-168 Auto Run
169-199 No Function
200-239 Reset
240-255 No Function
Warning: If after replacing the fuse you continue
to blow fuses, STOP using the unit. Contact cus-
tomer support for further instructions. Continuing
to use the unit may cause serious damage.
13 21
P. 9
| Tecshow ET Dual
English version