Steinbach Speedcleaner Poolrunner Manual De Instrucciones página 6

EN
Warnings
Read all warnings and safety instructions
listed below. Non-compliance with the safety
instruction can result serious
 This equipment is not intended for use by
anyone (including children) with restricted
physical, sensory or mental ability, or with
limited experience and / or limited knowledge,
unless they are supervised by someone re-
sponsible for their safety, or they receive in-
struction from them regarding the use of the
equipment.
 In order to prevent severe damage to the
cleaner, never power on the unit when it is
outside of the swimming pool!

The device must be connected to an
earthed 230 V protective contact
 Do not operate the cleaner when people are
in the pool.

If you pull the cleaner out of the water, do
not grasp the unit directly to the cable but at
the retaining bracket.
 Before switching on the unit and let espcape
the complete air.

Before power on, make sure the cable is ful-
ly released to avoid any winding, which could
affect the cleaner's performance or cause
damage.
 The filter bags should be cleaned immedi-
ately every time you use the unit.
 The cleaner should be stored in a cool and
ventilated place, away from direct sunlight,
when not in use.
 The power supply unit should be placed in a
shaded area. In order to avoid overheating
and the potential damage of components,
never cover the power supply unit.
 Only authorized after sales service person-
nel should open and repair the cleaner's mo-
tor assembly and power supply unit.

The cleaner may only be used to clean
swimming pools. Any other use wages to the
immediate maturity of the warranty

Children may not use the
Page 6 of 50
accidents.
socket.
claim.
cleaner.
 The cleaner is not a toy.
 Do not uncover the protective film which is
sticked on the operating panel.
Warnings
The automatic pool cleaner is not suitable for
swimming pools with a foil thickness of less
than 0.4 mm. It may be possible in certain
circumstances that the liner gets damaged. A
use of the pool cleaner below the specified
foil thickness is at your own risk.
Introduction
Our automatic swimming pool floor cleaner Speedcleaner „Poolrun-
ner" is a new, powerful and automatic system for cleaning swimming
pools. Through its advanced computer controlled program, it can
clean the pool floor automatically without draining pool water. At the
same time, it filters the pool water and gets rid of suspended parti-
cles and sediments. The Poolrunner can only absorb loose debris
particles from the floor. An adherent contamination must still be re-
moved manually. For safe operation, the cleaner works on 24V di-
rect current. Please read these instructions carefully in order to use it
properly.
The automatic pool cleaner can be used for almost all standard
pools with flat, level ground.
Safety
Your cleaner has been carefully tested after
manufacture and left the factory in perfect
technical condition. To maintain this orderly
condition and to ensure safe operation, the
user should always adhere to all recom-
mended instruction in this manual. If there are
indications that safe operation of the pool
cleaner can not be guaranteed, the product is
to be immediately unplugged from the elec-
tricity supply and prevented from unintended
re-connection.
This is the case:
 if the device shows visible damage
 if the device no longer seems opera-
tional
 after prolonged storage under unfavora-
ble conditions
When the power cord or other parts of this
appliance is damaged, it must be replaced by
the manufacturer or its service agent or a
Poolrunner | 2015_V1